2.0.0 - 2.0.1¶
Compatibility: EVA >= 2.4.0
2.0.1 changes
The only change (an important one) in 2.0.1 was fixing the belt paths that were not perfect in 2.0.0.
An MGN12 rail is ~60% of the weight of an MGN15 rail. EVA is dropping support for MGN15 in version 2.4.0 for that and other reasons like easier maintenance.
To avoid leaving V-Core Pro users locked out from future EVA updates this final version of Easy Mod has been prepared.
Two variants¶
To make the transition to MGN12 easier and hopefuly cheaper, two variants of the xy_joiner
parts are provided. Both variants now has an M5 screw that threads into the ends of the extrusions for an easier and more robust installation.
Variant A¶
This one is made in the hope that a 400mm rail will be more easily available than a 420mm one, it does however require a new 2020 extrusion.
Hardware | Length | Comment |
---|---|---|
2020 extrusion | 420mm | Need to buy |
MGN12 rail | 400mm | Available at Rat Rig |
BOM¶
Item | Quantity | Name | Printable |
---|---|---|---|
1 | 1.0 | 2020 420 mm | no |
2 | 4.0 | DIN 912 M5 45 mm | no |
3 | 4.0 | openbuilds_idler_wheel | no |
4 | 8.0 | 625 2RS | no |
5 | 4.0 | nylon_spacer | no |
6 | 4.0 | v slot slide nut M5 | no |
7 | 2.0 | xy_joiner_plate | no |
8 | 1.0 | xy_joiner_left_a | yes |
9 | 8.0 | DIN 912 M3 8 mm | no |
10 | 12.0 | Spacer 1 millimeter | no |
11 | 8.0 | Spacer 6 millimeter | no |
12 | 6.0 | M5 Hex nut Nyloc | no |
13 | 2.0 | ISO 898-1 M5 20 mm | no |
14 | 2.0 | ISO 898-1 M5 12 mm | no |
15 | 2.0 | DIN 912 M5 20 mm | no |
16 | 1.0 | DIN 912 M5 12 mm | no |
17 | 1.0 | x_endstop_block | yes |
18 | 1.0 | MGN12 rail 400mm | no |
19 | 1.0 | MGN12C carriage body | no |
20 | 1.0 | xy_joiner_right_a | yes |
Variant B¶
This variant reuses the same 394mm 2020 extrusion but requires a 420mm rail that might be harder to source.
Hardware | Length | Comment |
---|---|---|
2020 extrusion | 394mm | Same as V-Core Pro |
MGN12 rail | 420mm | Need to buy |
BOM¶
Item | Quantity | Name | Printable |
---|---|---|---|
1 | 1.0 | 2020 394 mm | no |
2 | 4.0 | DIN 912 M5 45 mm | no |
3 | 4.0 | openbuilds_idler_wheel | no |
4 | 8.0 | 625 2RS | no |
5 | 4.0 | nylon_spacer | no |
6 | 4.0 | v slot slide nut M5 | no |
7 | 2.0 | xy_joiner_plate | no |
8 | 1.0 | xy_joiner_left_b | yes |
9 | 8.0 | DIN 912 M3 8 mm | no |
10 | 12.0 | Spacer 1 millimeter | no |
11 | 8.0 | Spacer 6 millimeter | no |
12 | 6.0 | M5 Hex nut Nyloc | no |
13 | 2.0 | ISO 898-1 M5 20 mm | no |
14 | 2.0 | ISO 898-1 M5 12 mm | no |
15 | 2.0 | DIN 912 M5 20 mm | no |
16 | 1.0 | DIN 912 M5 12 mm | no |
17 | 1.0 | x_endstop_block | yes |
18 | 1.0 | MGN12 rail 420mm | no |
19 | 1.0 | MGN12C carriage body | no |
20 | 1.0 | xy_joiner_right_b | yes |
XY Corner Idlers¶
These have not changed from the previous version, and are still compatible.
Features¶
Optional M5x20mm
screws were added to where the 2020 extrusion ends meet the xy_joiners
The whole design is based of the V-Core 3 design (V-Core 3 ideas started with Easy Mod so it has come full circle now ). With that we have the single M5 bolt on the top of the part, much like on V-Core 3 but due do the differences between the two printers and the B variant, 100% compatibility was not achieved.