Skip to content

Easy Mod

"Easy Mod" is a modification for the Rat Rig V-core Pro printer developed by Paweł Kucmus and the Rat Rig community. Enables V-core Pro to use the EVA platform.

Up to Easy Mod 1.2.1 there is no additional hardware required to use Easy Mod on V-core Pro but 1.2.1 is only compatible with EVA to to it's 2.3.0 version. Scroll down for more information about the specific versions and what's planned for the future.

Printing

You can print the parts with 0.2mm or even 0.3mm layer height. Use 4 perimeters to make them strong (~1.8mm wall width), infill is not that important - 20% will be fine. No supports needed.

Roadmap

Attributions

Big thanks to:

  • Simon Davie for double checking the measurements and belt paths
  • top_gun_de for fixing the belt path in 2.0.1.

Issues

In case of issues or ideas please file an issue here: https://github.com/EVA-3D/easy-mod/issues

Contact

If you need a more direct contact I'm on the Rat Rig Unofficial Discord Server.

Back to top